Description
A HAL1x Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs. It is unique among the HAL Multiprocessors because it carries an expansion bus, which can increase the I/O up to 512 in x 512 out by adding up to 32 daisy-chained Expanders to a single HAL1x. A few to hundreds of more gain-sharing mic inputs are possible with AM automixers.
- DSP contains 9600 MIPS of processing power
- Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
- 8 analog balanced mic / line inputs on Euroblock connectors (green area)
- Mic inputs have switchable +48 V phantom power
- 8 analog balanced line outputs on Euroblock connectors (orange area)
- Front panel signal and overload indicators for all inputs and outputs
- Four RAD ports, each Port 2 in x 2 out plus control channel (blue areas)
- RJ-45 shielded CAT 5e connections up to 150 meters (500 feet)
- Twelve digital remote ports (brown and blue areas) [DR can connect to RAD Port]
- RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
- Two relay outputs on mini-euroblock 6-pin connectors (gray area)
- COM, NC & NO, 2 A, 48 V 60 W max switching power
- Four logic inputs on mini-euroblock 6-pin connectors (gray area)
- Internal passive pull-up
- Expansion bus connects up to 32 optional expanders (red area)
- RJ-45 connectors and shielded CAT 5e (or better)
- Supports up to 32 daisy-chained expanders
- HAL1x and each Expander can be up to 100 meters (300 feet) away
- 512 in x 512 out audio channel potential
- Propagation delay is only 22.4 μs across 32 expanders.
Unit Size: 2U, 3.5″H x 19″W x 8.25″D (8.9 cm x 48.3 cm x 20.9 cm)
Unit Weight: 7 lb (3.2 kg)
Call for pricing
