TOA P-906MK2 Power Amplifier

Category:

Description

 

  • Modular Single Channel Power Amplifiers for paging, background/foreground music distribution and music/messaging-on-hold.
  • Proven TOA Quality and ReliabilityEngineered for High Performance with wide frequency response, very low noise and distortion, and excel-lent output regulation.
  • Input Module Slot accepts most TOA plug-in modules for custom system configurations.
  • 25 V, 70 V and 8 Ohm Transformer-Isolated Speaker Outputs with screw terminal connector and protective cover plate.
  • Direct Low-Impedance Output Mode bypasses output transformer.
  • Direct Input for connecting an external mixer or other source.
  • Selectable Input Sensitivity to accommodate high or low input levels.
  • Master Volume Control.
  • Low Cut Switch to limit low frequency response.
  • .Normal, Clip, Power, Protect, and Signal Indicators provide unit status.
  • Rear Panel AC Convenience Outlet for powering external equipment
  • Turn-On Delay disconnects output during power-up.
  • Over-current and Thermal Protection Circuitry prevents potential damage from overload, short-circuit, or over-heating.
  • Volume Control Security Knob Included
  • Optional Rack-Mount Kits
  • UL / cUL Listed
  • Five Year Warrant

 

Specification
Type Power amplifier
Power Requirement AC mains, 120 V, 60 Hz
Power Consumption 100 W
Output Power 60 W RMS
Power Band Width (D) 20 〜 20,000 Hz, 0.5% THD
(T) 50 〜 20,000 Hz, 0.5% THD
Frequency Response (D) 20 〜 20,000 Hz, ±1 dB
(T) 20 〜 15,000 Hz, ±1 dB, (T) 20 〜 20,000 Hz, +1 dB, -3 dB
T.H.D 0.01% at 1 kHz, rated output
Inputs One Input Port : Port accepts any input module expect T-01.
One Direct Input
※ Use of direct input prohibits use of modular input port.
Input Sensitivity /Impedance Input Port : 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input : 100 mV or 1000 mV (switchable)/10 kΩ
Outputs(T)=Transformer (D)=Direct Main (T) : 8 Ω, 25 and 70 volts, balanced
Main (D) : 4 Ω, unbalanced
Output Regulation(1kHz) (D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load
S/N Ratio(Band Pass 20 〜 20,000 Hz) Input level switch in 0 dBV (1000 mV) position : 108 dB
Input level switch in -20 dBV (100 mV) position : 90 dB
Controls 1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch
Indicators 1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED
Protection Self-protection, with AC fuse (inside)
Connectors Input : Card-edge connector and screw-terminal strip
Output : Screw-terminal strip
AC outlet : 3-pin grounding type
AC power cord/plug : SJT, 3-prong type
Temperature Range -10℃ 〜 +60℃ (12゜F 〜 140゜F)
Finish Black
Dimensions(W×H×D) 420(16.54″) × 99.1(3.90″) × 358(14.09″) mm
Weight 9.1 kg (20.06 lb.)
Accessory Volume control cover (YA-920)……1
Option Rack mounting bracket (MB-25B)