Rane HAL3s Multiprocessor

Description

ranelogoA HAL3s Multiprocessor supports 6 in x 10 out audio, with 2 in x 6 out on balanced analog connections, and another 4 in x 4 out digitally through RADs. The two analog Inputs are Line / Line-Plus / Mic / Mic+48V capable. In addition to supporting balanced line and microphone inputs, this configuration allows a stereo pair connection to an input, converting to a single L+R mono signal.

Two DR ports provides support for preset recall, level control and select functions using a DR1, DR2 or DR3. If more logic ins and outs are needed for pots, switches or external indicators, a DR4 or DR5 may be added. DRs can be operated from a RAD port, so up to four DRs can plug into a HAL3s when RADs aren’t needed.

  • DSP contains 2400 MIPS of processing power
  • Ethernet 1000BASE-T with Zeroconf service discovery protocol for easy set up
  • 2 analog Mic / Line-Plus Inputs on Euroblock connectors (green area)
    • *“Mic / Line-Plus” Inputs accept a balanced line, or mono left & right unbalanced lines, configured in Halogen software.
  • 6 analog balanced line outputs on Euroblock connectors (orange area)
  • Front panel signal and overload indicators for all inputs and outputs
  • Two RAD Ports, each Port 2 in x 2 out plus control channel (blue areas)
    • RJ-45 shielded CAT 5e connections up to 150 meters (500 feet)
  • Four Digital Remote Ports (brown and blue areas) [DR can connect to RAD port]
    • RJ-45 shielded CAT 5e connections up to 300 meters (1000 feet)
  • Four Logic Inputs on Mini-Euroblock 6-pin connectors (gray area)
    • Internal passive pull-up
  • Unit Size: 1U, 1.75″H x 19″W x 8.25″D (4.4 cm x 48.3 cm x 20.9 cm)
  • Unit Weight: 5 lb (2.2 kg)
  • Shipping Weight: 9 lb (3.8 kg)

Call for pricing

Rane.com